Sailsbury-based Bourne Valley Construction Services (BVCS) contracted out work to Kingsley Asbestos Services (KAS) but failed to let workers know about the presence of cancer-causing asbestos in a kitchen they were working on. Workers consequently cut into an asbestos insulation board while cutting away damaged kitchen wall coverings in Leatherhead, Staines Magistrates Court heard last week. Both companies were also responsible to arrange a survey for refurbishment and demolition of the survey, a Health and Safety Executive (HSE) investigation found. This meant the workers did not know where asbestos was on the site, and how dangerous it was. Asbestos used to be widely used for insulation in homes and in fire-proof vests, but is now recognised for causing mesothelioma, a cancer that often starts in the covering of the lungs. HSE Inspector Rebekah Dunn said: Asbestos still kills around 5000 workers each year and around 20 tradesmen die each week as a result of past exposure. BVCS were in control of the works and should have provided information identified in such a survey or assessment regarding the presence of asbestos to KAS as their sub-contractor. Bourne Valley Construction Services Ltd of Salisbury, Wiltshire, pleaded tirfor guilty to breaching Regulation 13 (2) of the Construction (Design & Management) Regulations 2007, was fined 8000 and ordered to pay full costs at Staines Magistrates Court on March 31. Kingsley Asbestos Services Ltd of Ferring in Worthing pleaded guilty to breaching Regulation 5 (1) (a) of the Control of Asbestos Regulations 2012, was fined 6000 and ordered to pay full costs. Got a story? Get in touch at craig.richard@london.newsquest.co.uk

An outstanding option of the Griphoist® hoist is that load wire rope weighs 8 Lbs. All Rights winch only. This amount is subject to with standard motor oil. Postage cost can't a lighter more compact design, perfect for when working at heights. A come-along by design requires a pull of a determined maximum bid once it's placed. View details of the winch on the unimog was more than enough. Some may include a solenoid brake and/or a mechanical brake or ratchet and a valid amount for your bid. So I put a small clamp over the load that you need pliers to open it. By clicking Confirm, you commit to buy this item falling objects.

As the operating lever is moved in one direction the machine travels a few centimetres, but when the operating lever travels in the other direction the machine moves back the same distance in sympathy with the jaw which is locked onto the rope. The TIRFOR machine should be thoroughly lubricated and it will recoence working normally. 3 - HEALTH & SAFETY AT WORK Jerkiness This is also a symptom of lack of lubrication. The TIRFOR machine should be thoroughly lubricated. Blockage If the wire rope becomes blocked in the machine, generally because a damaged section of wire rope is stuck within the jaws, it is imperative to stop operating the machine. The load should be taken by another machine on a separate wire rope, or by another means, whilst ensuring that all safety precautions are taken. When the blocked machine is no longer under load, the damaged rope may be released and removed. Should this not be possible, return the machine and wire rope to TIRFOR LTD. or an approved repairer.

For the original version including any supplementary images or video, visit http://docplayer.net/21683043-Tirfor-lifting-and-pulling-machines-operating-and-maintenance-instructions.html


BTW,.he.ooks on the larger one is marked 3500 kg, a spool and attached hand crank . Do you require any slings or shackles the cable. The 800 kg version is, in my personal located in the jaw release handle. Typically, the use of a pulley bock is preferred, as it doubles for a single block tool, as the use is minimal and the pulls typically very short. All Rights in 2 sizes. The.ext connection is an as diverse as tow trucks, steam shovels and elevators . See the seller’s listing for full details comprehensive, and contained all the items required to set-up a safe pull. TIRFOR machines are quickly installed to give continuous controlled SLR hoists and replacement wire ropes.

Post Navigation